The three-level safety education system must be conscientiously implemented, and a comprehensive education and training session must be conducted for all construction personnel, especially for newly arrived workers, ensuring personnel, content, and time are in place without going through the motions. The system of special-operation workers holding certificates must be adhered to; personnel without operation certificates or with expired certificates are strictly prohibited from working. Before starting work, safety technical briefings shall be conducted according to the characteristics of the trade and construction conditions, and records shall be kept.

Safety foundation management inspection

1. Has a safety organization been established, and have full-time safety personnel been allocated as required?

2. Are the project manager, project chief supervisor, and full-time safety personnel on duty and performing their duties?

3. Do special-operation personnel hold valid certificates for on-post operations, and have they passed safety examinations and education before starting work?

4. In response to changes in newly arrived and transferred workers during the resumption period, have pre-job training and education been carried out for workers on construction site safety knowledge, precautions, rules and regulations, and operating procedures?

Temporary electricity inspection

1. Have external power line protection and on-site overhead lines been inspected in place?

2. Are main distribution boxes, sub-distribution boxes, and switch boxes installed as required?

3. Are leakage protectors operating effectively?

4. Has the 36V safety voltage been implemented in on-site dormitory areas?

Safety protection facilities inspection

1. Has an annual safety protection plan been formulated?

2. Are safety belts, helmets, and nets inspected and installed in place?

3. Are edge and opening protection facilities installed as required?

4. Are safety passage shelters erected as required?

Hoisting and lifting inspection

1. Have hazards been eliminated in hoisting machinery foundations, verticality, attachment devices, and safety insurance devices?

2. Do hoisting machinery and other mechanical equipment have acceptance qualification procedures?

3. Has seasonal maintenance and servicing of hoisting machinery been implemented?

Construction machinery and tools inspection

Whether the performance of various construction machinery and tools has been verified in place.

Deep foundation pit inspection

1. Have safety conditions such as foundation pit support and drainage been inspected in place?

2. Does construction affect the safety of adjacent buildings and pipelines, including foundation pit support deformation monitoring records, settlement observation records of the surrounding environment of the foundation pit, and water accumulation in the foundation pit?

Scaffolding inspection

1. Are there safety-use and acceptance qualification procedures for scaffolding and unloading platforms, with emphasis on the safety of floor-standing scaffolding, the cantilever beams and anchorage ends of cantilevered scaffolding; the safety devices of attached self-climbing scaffolding; the installation of wall ties; and isolation measures between scaffold bodies?

2. Has the inspection of cantilever beam anchorage and counterweights for suspended baskets for work at height been implemented?

3. Are load tests conducted before using suspended baskets for work at height?

Formwork support inspection

1. Are the inspection and acceptance records at each stage of formwork support system erection and the safety technical briefing materials complete?

2. Are the formwork support system members installed in accordance with the plan?

Fire safety inspection

1. Has a fire protection organization been established, and have fire protection equipment and facilities been allocated as required?

2. Is there a fire protection general layout plan?

3. Is there a layout plan for fire protection facilities and equipment?

4. Has a fire protection management system been formulated?

5. Have fire protection responsible persons been designated, etc.?

Dust prevention and control inspection

1. Has the on-site "ten compliance standards" been implemented in place?

2. Have effective covering measures been taken for exposed earthwork or dust-prone materials?

3. Check item by item whether construction enclosures, sprinklers, fog cannons, vehicle washing platforms, video and dust monitoring equipment are in normal working condition.

Management and control of major hazard projects

is the top priority of construction safety management

"Six no-construction" rules

help ensure safe construction of major hazard projects!