TS-K100CZ (A) Hole/Trench Sediment Thickness Detector

TS-K100CZ (A) Hole/Trench Sediment Thickness Detector

The hole/trench sediment thickness detector adopts the probe pressure and probe inclination testing method: when the sediment probe is lowered to the bottom of the hole/trench, the probe lifting motor automatically stops lowering the probe, and the host reads the probe status; when the probe inclination exceeds a certain range, it prompts adjustment of the probe position until the probe is approximately upright. The host controls the probe to extend slowly while measuring the probe pressure, probe inclination, and extension length. When the probe reaches the hard rock at the hole bottom, the probe pressure and probe inclination increase abruptly; at this point, the probe extension length is the sediment thickness at the current position.