Larsen Steel Sheet Pile Quotation Changsha Larsen Steel Sheet Pile Bailey Panel Supply

Product Details

Precautions for Removing Steel Sheet Piles

  Steel sheet piles are similar to bowl-buckle scaffolds and disc-buckle scaffolds; they are a new type of building material. Larsen steel sheet pile quotations are usually laid in large pipelines, bridge cofferdams, and can also be used for retaining soil and water, as well as embankment revetments. They play an important role in these aspects.

  Steel sheet piles used for cofferdams are not only green and environmentally friendly but also have fast construction speed and low construction costs, with good waterproof function. So what precautions should be taken when removing steel sheet piles after construction is completed? Below, the editor will tell you one by one.

   1. The installation and disassembly of the pile driver and auxiliary arm should be carried out on flat and hard ground.

   2. When two or more people or a guide operator work together, please operate according to the specified communication signals.

   3. When loading and unloading the pile driver, please use a crane. The hook must have a device to prevent decoupling.

   4. Please check daily whether the motor brake, hydraulic pipes, and bolts, nuts, shaft pins, etc. of each part are loose. Check the capacity and leakage of the pile driver's oil. 5. The installation and disassembly of the auxiliary arm should be carried out according to the essentials for installing and removing the bucket of a hydraulic excavator.

   6. Please check whether the jaw teeth are excessively worn.

   7. Please regularly remove accumulated soil and other debris from the pile head. If the pile head is deformed, do not remove it.

The above are the precautions for removing steel sheet piles that the editor has thought of. If you are interested, please save them.

Main Functions of Larsen Steel Sheet Piles

  The practical value of Larsen steel sheet piles is reflected in the innovative production of newer products, such as in some special welded buildings; metal plates made by hydraulic vibratory pile drivers; the development of special sealing and printing processes is an obvious example.

　　Steel sheet piles have been used as vertical sealed retaining walls to protect contaminated land. It has been found that steel sheet piles meet all requirements for preventing leakage and pollution. The advantages of steel sheet piles as retaining walls have also been widely used in other fields. Larsen steel sheet piles are steel structures whose edges are connected and can be freely combined to form a continuous tight retaining or retaining wall. Steel sheet pile support: The steel sheet piles for deep foundation pit support are customized from hot-rolled steel sheets with locks or jaws. The steel sheet piles are connected in order to form a Larsen steel sheet pile wall.

  Steel sheet pile support is suitable for deep foundation pit support, with a foundation pit depth of more than 5 meters, and is a continuous support. The shape of the steel sheet pile is similar to a U-shaped steel, but wider and deeper than U-shaped steel, and the cross-section is roughly a trapezoid. When supporting, first position the line, and use a vibratory pile driver or excavator to lay 1 positioning pile. The subsequent piles are opposed to the positioning pile in forward and reverse directions.